| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003F6Y000X |
| Title: A750F AUTOMATIC TRANSMISSION / TRANSAXLE: OIL COOLER: REMOVAL (2008 Sequoia) | ||
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE FRONT EXHAUST PIPE ASSEMBLY
3. REMOVE HOSE HEAT PROTECTOR
|
(a) Remove the bolt and hose heat protector. |
4. DISCONNECT WATER BY-PASS PIPE ASSEMBLY
|
(a) Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler, and separate the by-pass pipe from the automatic transmission. HINT:
Use a container to catch any coolant which flows out of the water by-pass hoses. |
5. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System)
|
(a) Disconnect the 2 transmission oil cooler hoses. |
(b) Remove the 2 bolts and transmission oil cooler with transmission oil cooler spacer.
|
(c) Remove the 3 bolts and separate the transmission oil cooler from the transmission oil cooler spacer. |
(d) Remove the 2 O-rings.
6. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/ Trailer Towing System)
|
(a) Disconnect the 2 No. 2 transmission oil cooler hoses from the transmission oil thermostat. |
|
(b) Disconnect the 2 transmission oil cooler hoses. |
(c) Remove the 2 bolts and transmission oil cooler with transmission oil thermostat.
|
(d) Remove the 3 bolts and separate the transmission oil cooler from the transmission oil thermostat. |
(e) Remove the 2 O-rings.
|
|